The handler is applicable for nearly all common hydrants through the exchange of the shaft adapter. The full load is separately adjustable from 18 till 100 Nm (with a DIP contactor) for both rotating directions.
It is also a hand drive without power supply possible by using
a deep-frozen-compliant battery. Therefore the closing of the
handler is also warranted by a damaged control cable.
The control inputs can be operated selectivelly over an internal
or external 24VDC power supply. Thereby the handlers
can be actuated from the common snowmakers.
Technical data
| Supply voltage: |
24VDC, - alternatively 230VAC |
| Message outputs: |
- full load limit „closed“ reached |
|
- full load limit „open“ reached |
|
- error handler |
| Operating temperature: |
-25°C till +40°C |
| Storage temperature: |
till -40°C |
| Dimensions: |
250 x 160 x 300 mm |
| Weight: |
9.1kg (without power supply 24VDC) |
Connection over a 10-pole connector.
The handler can be delivered also with pressure control and tube monitor and can be applied thereby also by manual machines. |
 |
Hydrant handler
Hydrant handler
Hand drive and 10-pole connector
Standard mounting accesoories:
torque bracket including driving shaft adapter |